Like any mechanism, the handle of the refrigerator tends to break, which is affected by a number of factors. First of all, a malfunction can occur due to too active use by family members. This applies to the smallest, who often pull for it during the game and do not understand that this can not be done.
Feature of Removing the Handle on a Liebherr Refrigerator
Liebherr refrigerator handle
Externally, the handle from the Liebherr model is very similar to a door. It is logical that it can break due to the same reasons. If you systematically pull it with an effort greater than required, then sooner or later it will need to be repaired. Of course, the easiest way is to purchase a new one, but before that, you should correctly remove the damaged Liebherr part, and then install the purchased one in its place. After all, the use of a door without a handle will be a real test, which will only lead to damage to the rubber band of the seal.
Broken handle
The process of transferring a part to a Liebherr model
- Since this element is held by screws, you should access them. To do this, you need to move the decorative lining. On the bend side, we easily pick up the bar, after which it smoothly slides, moving along the guides, specially installed for this. It should be borne in mind that on some models of refrigerators outwardly it seems that the decorative strip and the mechanism that holds it are one, although this is not so. Therefore, you should not try to remove them together, because this will only lead to damage to the integrity of the door and other mechanisms.
Decorative lining
- The next step is to unscrew the screws that hold the part. To do this, you need to have a simple cross-type screwdriver with you.
- Next, we screw the new part with screws, and then return the decoration plate to its place. The installation process is over and your refrigerator looks like new.
Parts Included
By the way, the question of replacing the handle in a Liebherr refrigerator is the most popular among all possible problems with this technique. The remaining components are made at the highest level, as befits a self-respecting German company. If you need to replace the freezer handle, the tips given above will also work.
The freezer handle is replaced in the same way.
Depending on the model, the replacement process may vary. Summing up, it should be noted that for this work does not require special knowledge and involvement of the master. Even a schoolchild can cope with such a procedure.
