An epilator is an electrical appliance that can be used to remove unwanted body hair.
We will figure out what it consists of and how to disassemble the epilator for cleaning.
Find out, how to clean the Philips epilator.
There are disk and tweezers. A multipoint device is a device in which a pair of discs, when rotated and touched, can remove hair roots.
This may be a Rowenta epilator or a different brand of product. These devices are capable of capturing hairs less than 0.5 millimeters long and generally have three operating speeds.
To remove thick hair of noticeable length, a second or third speed is more suitable. To remove shorter hairs, the first speed will do.
How to disassemble the well-known epilator "Rovent"?
After a certain period of use, the appliance may become clogged and stop working. We will learn how to disassemble the model of epilator "Rovent". A screwdriver, brush and needle are required to operate. To bend the edge of the case, use a screwdriver.
If cleaning has been carried out for a long time or never, hairs accumulate under the lid, because of this the appliance may refuse to work. The hairs get stuck inside and wrap around parts.
For cleaning, you can use a brush, which usually comes with any model. Then the cover must be returned to the housing and snap into place. This is one way. clean the epilator.
If you perform cleaning after each use, the appliance will operate smoothly. Timely cleansing will extend the life of the gadget.
To clean, it is important to unplug the cord. Do not clean the epilator with wet hands. It is advisable to use a brush, as there are small parts inside that should be carefully cleaned.
Popular Philips and Rowenta models
The model of the device does not really matter - it may be Braun or another manufacturer - it is important to take care of the device in a timely manner and use it with care.
How to care for an epilator?
Any product must be looked after, no exception, and expensive models from such well-known manufacturers as Philips.
First of all, it is worth reading the instructions, which are accessible and phased to explain the cleaning, operation and maintenance.
It is also necessary to ensure that the electrical wire of the mechanism is always in order. It is important that it does not interfere with the procedure, is not kinked or damaged.
It is necessary to monitor the condition of the epilator wire
If the device is running on battery power, it is necessary to ensure that the battery is working, not flowing.
For storage, it is recommended to use a suitcase or purse - usually they are also attached to the device. Storage systems look very stylish and protect the device from damage and scratches.
In addition, a suitcase or handbag can be taken on the road without fear of damaging the epilator. All the nozzles that are required for a quick and almost painless procedure are also placed in the company bag.
It will not be difficult to clean the epilator yourself, the failure of the battery itself or the wires will be eliminated in the service center - do not repair these parts yourself.
