The time has come "H" and began to collect dirty laundry. We loaded it into the drum of the unit, selected the necessary program and started it. As a result, they found the displayed combination of the F08 problem on the display.
When the manufacturer does not provide a screen for the device, the problem will be displayed using LED illumination depending on its model:
- The LED light is constantly on, indicating the quick wash mode, or you will find the blinking speed select LED.
Meaning and cause of the malfunction
The electric heating element (TEN) is not working, or there are breaks in the contact circuit in the area from the heater itself to the unit responsible for controlling the entire unit. As a result of such a malfunction, the control module receives a notification that there is no heating of the water to the required temperature, so the machine stops and displays a breakdown. In rare cases, it can work in the cold water wash mode.
What you need to do to fix the malfunction without resorting to professional intervention
- Open to the contact circuit. To fix the problem, inspect the contact connections in the area from the control unit to the heating element;
- Software crash. Force reboot. Turn off the power supply and leave it on for plus or minus 20 minutes. Then start the device and check its operation. The problem should go away.
- Check that the water supply is correct so that the pressure is adequate.
Have you checked all of these recommendations? It did not help? The machine did not work, but the problem continues to be displayed? This means that the breakdown is serious and you can’t do without professional help. Call a specialist in the repair of large household appliances (washing machines).
