Dirty washing was immersed in the unit tank and the necessary program was launched. But alas, the device did not respond to the established mode. In addition, she did not start pumping water, and the screen displayed a fault F6 or F06.
Moreover, the error could be displayed after the execution of the established washing mode, and without resetting the lock and not opening the hatch, and after a while, the abbreviation F06 was highlighted. Sometimes such a malfunction is displayed at any time during the execution of the selected program or is displayed during normal operation at any time.
In Ariston washing machines, in which the manufacturer does not provide a display, you can determine this malfunction by indicating certain processes, depending on the type of machine:
- The first Ariston Margherita models are equipped only with indicator lights - a network and door lock, you will find the indicator light responsible for supplying electricity in the form of Morse code blinking (blinks 6 times, then the silence interval and the cycle repeats). The program selector knob constantly rotates clockwise, making certain audible clicks.
- Hotpoint-Ariston such as ARSL, ARXL, AVM, etc. displays a problem by blinking the program completion indicators and drain. Or, indicator lights will be constantly lit, which are responsible for additional functions either horizontally or vertically, depending on the type of your washing machine.
- Hotpoint-ariston aqualtis such as AQSL, AQ9L, AQS0L, etc. signal a problem with F06 due to the blinking of indicator lights responsible for the temperature regime of 30 ° C and 40 ° C (when counting from the bottom up, these are the second and third indicators).
Breakdown value
Abbreviation Malfunction F06 or F6 can be in two types of machines with Arcadia and Ariston Dialogic control electronics. She points out:
- Door lock sensor defective (Arcadia).
- The electronic module and the program selection control are faulty (Dialogic).
Malfunction F06, how to perform minor repairs without professional help
Fault display F 06 / F 6 for Ariston units, the causes of which you can eliminate without calling the master repair of washing machines. Consider how you can solve the problem at home, depending on the modification of your device:
Hotpoint-Ariston with Arcadia Circuit Board | Ariston Dialogic Washers |
Door lock does not work. A foreign object has fallen into the space from the unit door, or you did not close the door. To fix the error, you need to remove the object, which prevents the door from closing tightly or closing it again so that you hear a characteristic click confirming the tightness of the fit. | Inappropriate response of the buttons (they do not start the program you selected). The button is not pressed, or does not hit back, i.e. lack of contact compounds. Make an effort and press on it several times, start and cancel the program, the fault should be fixed. |
No power supply, open circuit. It is necessary to examine the contact circuit from blocking the hatch to the electronic module. The machine should be installed correctly (check with the help of the construction level so that the machine does not jump and does not tremble when performing the established modes). | Open circuit in the "brain" (automatic process control module). All buttons should work well and when pressed, respond to the set washing mode, so you need to eliminate the break in the connection between the contacts. |
Software crash. Such a malfunction is eliminated very simply, it is necessary to reboot your washing machine.Turn off the power supply, then at an interval (to reset the previously set modes), start the device. The machine should start working normally. Make sure that there is no increased humidity in the room where your unit is located, then the device will not malfunction. | |
Have you completed all the recommended manipulations? Did the washing machine not start working? Error F06 continues to be displayed, then call the master, without professional help, you can not do.
